The most critical part of any house’s exterior is the roof.
This is the piece that protects everyone in the house from all kinds of bad weather, including rain, snow, wind, and sun. The shingles on the roof compose a very crucial part of the house’s weather-resistant properties.
The problem that many families come across is when their shingles start to deteriorate. If left alone, your roof could become vulnerable to all sorts of weather hazards, putting your house and family at extreme risk.
To address this concern, you have to learn how to repair shingles on a roof.
Let’s talk about that.
Know What Tools You Need
To repair shingles on a roof, you will need a few tools. A hammer, screwdriver, chisel, and wire cutter are a must. You will also need a pry bar to remove the old shingles and a putty knife to apply new ones. Tar and gravel also come in handy when repairing shingles.
You will also need shingles, roofing nails, a hammer, a utility knife, and roofing cement. Make sure to have a ladder to get to the roof.
The Steps in Repairing
There are a few steps to follow when repairing your roofing shingles. You can hire a roof repair company, but in case you wanted to do it DIY, here’s how:
Identify the Damaged Area and Remove
First, you need to identify the damaged shingles or if there are missing shingles. Once you have found the damaged shingles, you need to remove them. Also, take note that curled shingles should be replaced. This is done by prying them off with the pry bar.
Clean the Area
You will need to clean up the area where the new shingles will go. Use the wire cutters to remove any nails that are still in the way. Then, apply a layer of tar to the area. This will help the new shingles adhere better.
Apply Gravel
Apply a layer of gravel. This will also help the new shingles adhere better. Take the new shingles and place them over the area where the old shingles were.
Put Your Shingles in Place
Make sure that the new shingles are overlapping the old shingles by at least two inches. Use the putty knife to apply a layer of tar to the back of each shingle. This will help them stay in place.
Secure the New Shingles
Once the new shingles are in place, you will use the roofing nails to secure them. Finally, you will use the roofing cement to seal around the new shingles. This will help to prevent leaks. Once the cement is dry, your roof is repaired.
Learn Basic DIY on How to Repair Shingles on a Roof
If your shingles are curling, cracked, or missing, it’s time to repair or replace them. Replacing shingles is a daunting task, but with the proper tools and safety precautions, you can do it yourself.
This article provides a basic overview of how to repair shingles on a roof. For more detailed instructions, please consult a professional roofing contractor.
If you want to learn more tips like this, visit our blog page.