Friday, August 19

Complete Guide On How To Choose An LED Strip For Your Project

The LED strip became popular in the market for several reasons; in addition to being very versatile in different environments, it can ultimately change the environment through its type of lighting. We will talk a little about the advantages of using LED strips or LED ribbon lighting and how to choose the correct model to specify in your projects. That’s because, as much as it seems, something “simple” requires some important details that we can’t miss so we don’t have problems in the future.

Advantages of LED strip

Flexibility

Perhaps the main point is that, as it is a material of reduced size and flexibility, it allows installation in places where other types of lighting would be impossible. With this, many new possibilities have emerged, and creativity can run wild in projects with this type of lighting.

Durability

Using LED as a light source, the tape has a high longevity, being able to last up to 10 years, making it economical if we consider the long term.

Price

The LED strip is very competitively priced, especially considering that a single roll of the strip can light up to 5 linear meters.

Energy saving

This material has extremely low energy consumption. Joining this issue to the high durability and the form of manufacture that does not use metals is also better for human health and the environment. Now, as we’ve already discussed, the part of choosing and specifying LED strips lighting may seem like something relatively simple, but there are several issues that you should be aware of to ensure you choose the right type of light.

How to specify and choose the led strip?

operating voltage

We have models that operate at low voltage (12V or 24V) and that need auxiliary equipment called a driver, and there are also LED strips that operate at mains voltage (127V or 220V)

LEDs/meter

It is essential to keep an eye on the number of LEDs per tape meter. To guarantee a more homogeneous light, you should look for strips with the maximum amount of LEDs possible per meter. If the LEDs are too far apart, they will produce uneven lighting.

Luminous flux

Today, on the market, there are LED strips of different models in terms of luminous flux and power. To make decorative lighting on a shelf, you will need no more than 500 lumens/meter. Using a stronger tape, in addition to wasting energy and money, will cause the effect achieved to be completely different from the one projected.

Color

The LED strips can be of a single color (only white light or a single color like green, red, or blue), or they can be programmable as the RGB models (makes all colors except white) or RGBW (makes all colors and white).

Actual amount needed

Tapes are usually supplied in 5-meter rolls. However, they cannot be cut at any point. Specific cut points may lead to the loss of part of the roll or the need to purchase additional tape.

IP

There are tapes with an adequate protection index and other models suitable for outdoor areas. Please pay attention to this point to ensure the success of your installation. With all these teachings, we can see numerous advantages of the LED strip; it is enough to understand some details so that the environment is cozy for the user and for the work to be as assertive as possible.